Description

Steel tool trolley with 2 straight and 2 swivel castors. 5 Steel drawers, lockable with a key. Handle provided for easy movement.
Overall Size: 610mm x 330mm x 775mm (W/O castors).
Drawer 1 Content:
250mm Water pump plier, 200mm Combination plier, 180mm Side cutting plier, 200mm Long nose plier, Measuring tape 5m x 19mm, Stainless Steel Ruler 300mm, Engineer’s Square 300mm, Digital Caliper 150mm, Aluminium Torch 3 x AAA without battery and Engineer’s Scriber 225mm.
Drawer 2 Content:
Screwdriver: 5mm x 75mm, 6mm x 100mm, 8mm x 150mm, PH1 x 75mm, PH2 x 100mm and PH3 x 150mm.
Combination spanner: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm and 24mm.
300mm Combination wrench and Safety Goggles.
Drawer 3 Content:
1/4″ Drive Bi-Hex sockets(12 point): 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm and 14mm.
1/2″ Drive sockets: 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 22mm, 24mm and 27mm.
1/4″ Drive Bit sockets: SL4, SL5.5 and SL7.
1/4″ Drive Bit sockets: PH1, PH2 and PH3.
1/4″ Drive Bit sockets: PZ1, PZ2 and PZ3.
1/4″ Drive Hex Bit sockets: 3mm, 4mm, 5mm, 6mm, 7mm and 8mm.
1/4″ Drive Torx Bit sockets: T10, T15, T20, T25, T30 and T40.
Hex Key: 1.27mm, 1.5mm, 2mm and 2.5mm.
Ratchet handle 1/2″ Drive, Ratchet handle 1/4″ Drive, 1/4″ Extension bar 50mm, 1/4″ Extension bar 100mm, Extension bar 1/2″ Drive 125mm, Sliding bar 1/4″ Drive 115mm, Universal joint 1/4″ Drive, Spinner handle, 1/4″ x 1/4″ flexible bar, 1/4″ x 1/4″ Coupler, 1/2″ Drive spark plug socket 21mm, Locking Plier 225mm, Pipe Wrench 300mm and Utility Knife.
Drawer 4 Content:
File Set (200mm): Round, Half Round and Flat.
Pin Punch Set: 2mm x 150mm, 3mm x 150mm, 4mm x 150mm, 5mm x 150mm, 6mm x 150mm and 8mm x 150mm.
Ball Pein Hammer 16oz, PVC Dead Blow Mallet 1LB, 300mm Hacksaw Frame, Centre Punch: Shaft 12mm x Tip 5mm x Length 150mm, Cold Chisel: (13mm x 23mm) x 28m x 250mm and 250mm Tin Snip.