J & G Holdings (Pty) Ltd

We supply to your specification

MARKING TOOLS



CURV-O-MARK RADIUS MARKER STD #1224 - PIPE


Folding type design. Will fit conveniently into a shirt pocket. Has sturdy friction joints to maintain rigidity and accuracy, and are made from lightweight, rustproof Aluminium for long wear. A soapstone crayon is already installed in each radius marker.

CNT0105 (Size: Up to 610 mm diameter)













ECLIPSE TRAMMEL HEADS / POINTS NO.33 PER PAIR


Also known as a “beam compass”. For laying out the distance between two points. For scribing large arcs and circles. Use wooden strip off-cut minimum 10 mm thick x 38 mm wide. A pencil can be fitted in place of one pin.

ECP4800 (Pair)












GROZ POCKET SCRIBER PEN MSP3

These scribers have a black body and knurled chuck. The point can be reversed in the body for convenient storage. The pocket clip also prevents the tool from rolling off the bench.

GRO5420 (Size: 89mm)














GROZ ENGINEERS SCRIBER 190MM MS7

This double ended scriber has one right angled end. Both points are hardened and ground to facilitate accurate marking out.

GRO5400 (Size: 190mm)









GROZ ENGINEERS SCRIBER SET 3PIECE MS/3-ST

3 Interchangeable threaded points. Short straight 225mm, Short bent 225mm and long bent 300mm. Very handy as different combinations can be used for different applications.

GRO5405









ECLIPSE ENGINEERS SCRIBER - E222

Hardened and ground point. Used for accurate marking out. Double -ended.

ECP4680 (Size: 190mm)

  












GROZ POCKET SCRIBER CARBIDE AND MAGNETIC TIP


Hardened and ground point. Used for accurate marking out. Double -ended.

GRO3040
















MTS BOILERMAKERS CHALK 3KG BOX 144 PIECE - SOAPSTONE

Masonry & construction soapstone pencil marker. Supplied in 3kg box, 144 pieces.

HON0800 (Size: 150mm)











CURV-O-MARK FLAT SOAPSTONE HOLDER 27 + SOAP


Flat crayon holder. For protection of soapstone crayons. The design allows the use of over 90 percent of the crayon.

CNT27









CURV-O-MARK CONTOUR MARKER STD #1 - PIPE STANDARD

It consists of an X-shaped frame, calibrated protractor, and a triple-jointed marking arm and holder. The holder accepts a soapstone crayon (included), felt pen or pencil. It is used to lay out pipe and structural steel joints. Laterals at any angle, tees, wyes, crosses, elbows - any type or size of joint can be quickly and precisely laid out. Pipe from 38 to 450 mm diameter or structural steel members up to 450 mm. It can be used right side up or upside down, depending on the direction of the line to be scribed. The protractor is calibrated on both sides - one in degrees, the other in rise-inches-per-foot-to service any type of measurement need. The unit comes with a Structural Adaptor designed to simplify the layout of structural joints, including I-beams, angles, channels, square tubing and similar shapes. The Contour Marker is made from durable, lightweight Aluminium. It requires minimal maintenance, only occasional oiling of the joints, to provide long service life. No more complicated mathematical formulas. No more cut and try. No more needless material waste.

CNT1 (38-450mm Pipe Q)










CURVO-O-MARK CONTOUR MARKER JUMBO #4 - PIPE


A larger version of the standard Contour Marker. ( See CNT1 ). The Jumbo Contour Marker (JCM) has been developed for use in the layout of large diameter pipe, from 200 to 1200 mm. With its Structural Adaptor, the JCM can be used in the layout of extremely large structural steel members up to 1200 mm wide. The JCM comes complete with a durable web strap that helps hold the unit in place during layout. A built - in adjustable dial bubble protractor ensures accurate center-line location. A soapstone crayon is included.

CNT4 (200 -1200mm Pipe Q)










CURVO-O-MARK CENTERING HEAD STD #6 - PIPE


Centering Heads aid in the setting of centerlines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. The standard model is used on pipe 13 mm diameters and larger. It has a 100 mm Y-type head and is fitted with an adjustable dial bubble protractor and a manually operated hardened centering pin.

CNT6 (No: 6, Head Size: 100mm)












CURVO-O-MARK CENTERING HEAD J/CONT 7 14776 - PIPE


Centering Heads aid in the setting of centerlines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways and measuring declivity. The Jumbo Centering Head is for pipe 25 mm diameters and up. It has a 200 mm, Y-type head, and a dial bubble protractor. A spring-loaded hardened centering pin eliminates the need for a hammer. Just make the alignment and press the trigger.

CNT7 (No: 7, Head Size: 200mm)












CURVO-O-MARK SPARE DIAL / VIAL FOR NO.8 07220


The DSL is a spare adjustable bubble protractor used with a number of Curv-O-Mark® tools (Stock No.: 4, 6, 7, 8, 20 and 33). The protractor covers 180? degrees through two 90? degree quadrants, reading in 21/2-degree increments. The bubble is cast in the Aluminium dial.

CNT0030












MTS CARPENTERS PENCILS 12 PIECE 496/500

Almost any material can be marked out with these carpenters pencils, with the exception of some metals and polished or glazed surfaces.

HON7020 (Size: 12 Piece)









STAEDTLER CARPENTERS PENCILS - 12 PIECE

Almost any material can be marked out with these carpenters pencils with the exception of some metals and polished or glazed surfaces.

STD0005 (Hard - Green 148-30)   
STD0010 (Medium - Red 148-30) 







ROLFES SCHOOL BOARD CHALK - WHITE


Rolfes School White Soft Chalk.

ROL0035 (100 pieces per Box)
ROL0037 (12 pieces per Box)  











ROLFES SCHOOL BOARD CHALK - COLORED


Rolfes Colored Soft Chalk. 100 Pieces per box.

ROL0040












ROLFES HARD LUMBER CRAYON 10 PER PACK

Rolfes lumber marking crayons are great for marking lumber, masonry, steel, wood posts, etc. Sold in packages of 10. Extruded hard lumber crayons. Sets the standard for lumber crayons. Tough & durable. Lasts 10 times longer than ordinary molded wax crayons. Hex-shaped for easy gripping. Works in a variety of environments and is fade-proof, water-proof and smear-proof. Does not melt in direct sunlight. Works on wet (green) or dry wood, metal, concrete and most other surfaces.


HLM0005 (Black) 
HLM0010 (Blue)   
HLM0020 (Red)     
HLM0025 (White) 
HLM0030 (Yellow)









MTS PLASTIC CASE CHALKLINE 30CM


A rigid PVC Chalkline with 30m string and plastic end hook.

HON0805 (Length: 30m)











MTS ALUMINIUM CASE CHALKLINE 30M #56329

Sturdy die-cast Aluminium case. 30m line with plated hook. Rewind handle.

MTS2150













STANLEY PLASTIC CASE CHALKLINE 30M 0-47-440

High impact ABS case. Sliding door for quick and easy refill. 30gr capacity.

STA2606 (Length: 30m)





  




STANLEY DIE CAST METAL CASE CHALKLINE 30M 47-099


Metal case. Sliding door for quick and easy refill. Universal hook attaches to any projection or slot. Fold away handle. 30gr capacity.

STA2605 (Length: 30m)












MTS PLASTIC CASE CHALKLINE WITH POWDER & LINE LEVEL

This handy 3 piece set features:
A rigid PVC Chalkline with 15m string and plastic end hook. 75mm line level. 120gram blue marking chalk in plastic bottle with convenient refill spout.

MTS2152 (Size: 3 Piece)















STANLEY CHALKLINE REEL & CHALK REFILL BLUE 47-442


High impact ABS case. Sliding door for quick and easy refill. 113gr capacity.

STA2609 (Length: 30m)













STANLEY CHALKLINE REFILL - REPLACEMENT LINE 47-101

Replacement line for chalk reels.

STA2600 (Length: 30m)












MTS CHALKLINE REFILLS 50G

Suitable for all self-chalking lines. 50gr.

ELC0550 (Blue)   
ELC0555 (Red)    
ELC0560 (White)











ROLFES CHALK LINE REFILL 150G

Chalk powder refill. 150gr.

ROL0045 (Blue)   
ROL0050 (Red)    
ROL0055 (White)











AKRUT MECHANICS BLUE 30G TUBE

For marking and setting out on metal surfaces. Paste form.

AKR0005 (Size: 30gr) 













KENDO CHALKLINE SET 3 PIECE


High impact ABS case. Sliding door for quick and easy refill. 30gr capacity.

KEN45342 (Size: 30m)















SPANJAARD ENGINEERING MARKING BLUE


A water resistant distinct blue color spray used in engineering workshops for marking all types of metals and other materials

SPN0280 (Size: 350ml - 24)      
SPN0280-12 (Size: 350ml - 12)
















STANLEY CHALKLINE REFILL POWDER 133G


Refill for Chalkline. 113gr capacity.

STA2615 (Blue - STHT47403-8)
STA2620 (Red - STHT47404-8) 













J and G Holdings (Pty) Ltd

We supply to your specification