www.jgholdings.co.za

J & G Holdings (Pty) Ltd

We supply to your specification

MICROMETERS




MOORE & WRIGHT MECHANICAL OUTSIDE MICROMETER 0-25MM STD TRADITIONAL 1965M


Features:
Standard: BS870, DIN 863/1, ISO361. Tungsten carbide measuring faces 6.8mm spindle diameter. ‘Speeder’ type ratchet. Locking lever. Choice of standard or Vernier type sleeve. Tapered bow frame. Supplied in plastic pocket case. Adjusting key. Blue textured frame finish.

Accuracy:
Measuring Faces Flatness - 0.001mm
Measuring Faces Parallelism - 0.003mm
Screw Pitch - 0.003mm
Carbide Anvil - 0.01mm


MAW1965M




MOORE & WRIGHT OUTSIDE MICROMETER 0-25MM X 0.01MM STD MAW200-01


Features:
Standard: DIN863. High quality outside micrometer. Design line product Satin chrome scale. Hammer tone finished frame with high quality insulated grip. Tapered for easier access to difficult areas. With Tungsten carbide measuring faces and constant force ratchet. Packed in plastic box with standard and adjusting key.

Range:  0-25mm
Resolution: 0.01mm


MAW200-01




MOORE & WRIGHT BASIC DIGITAL OUTSIDE MICROMETER 0-25MM X 0.001 MAW-230-01MDB


Features:
Standard: DIN 863. Low cost, mechanical /digital read-out micrometer. Satin chrome scale. No batteries needed. Forged steel frame with insulated grip. Tapered for easier access to difficult areas. With Tungsten carbide measuring faces and constant force ratchet. Packed in wooden / plastic box with standard and adjusting key.

Range: 0 - 25mm
Resolution: 0.01mm


MAW230-01MDB  





MOORE & WRIGHT DIGITAL OUTSIDE MICROMETER - DIGITRONIC MAW-201-01DAB


Protection to IP54 specifications. Rugged steel design. Large LCD display. Absolute and incremental modes. Carbide measuring faces. Ball attachment included.

Range: 0 - 25mm
Resolution: 0.001mm 

     
MAW201-01DAB  



MOORE & WRIGHT OUTSIDE MICROMETER STD 25-50MM X 0.01MM MAW-200-02


Features:
Standard: DIN863. High quality outside micrometer. Design line product. Satin chrome scale. Hammer tone finished frame with high quality insulated grip. Tapered for easier access to difficult areas. With Tungsten carbide measuring faces and constant force ratchet. Packed in plastic box with standard and adjusting key.

Range: 25 - 50mm
Resolution: 0.01mm


MAW200-02  



MITUTOYO OUTSIDE MICROMETER 25-50MM 103-138

Hammerstone-green, baked-enamel finished frame. Clear graduations on satin-chrome finish. Positive locking clamp. Ratchet Stop or Friction Thimble for exact repetitive reading. Provided with a standard except for 25 mm model.

Range: 25 - 50mm
Graduation: 0.01mm
 Accuracy µm: ±2

MIT103-138



MOORE & WRIGHT OUTSIDE MICROMETER STD 50-75MM X 0.01MM MAW-200-03


Features: 
Standard: DIN863. High quality outside micrometer. Design line product. Satin chrome scale. Hammer tone finished frame with high quality insulated grip. Tapered for easier access to difficult areas. With Tungsten carbide measuring faces and constant force ratchet. Packed in plastic box with standard and adjusting key.

Range: 50 - 75mm
Resolution: 0.01mm


MAW200-03  


MOORE & WRIGHT OUTSIDE MICROMETER STD 75-100MM X 0.01MM MAW-200-04


Features:
Standard: DIN863. High quality outside micrometer. Design line product. Satin chrome scale. Hammer tone finished frame with high quality insulated grip. Tapered for easier access to difficult areas. With Tungsten carbide measuring faces and constant force ratchet. Packed in plastic box with standard and adjusting key.

Range: 75 - 100mm
Resolution: 0.01mm


MAW200-04 




GROZ OUTSIDE MICROMETER

Steel frame prevents flexing ensuring greater accuracy in measurement. Can be operated efficiently with one hand. Non– wearing carbide tipped anvil and measuring faces ensure accurate measurements over a long period of time. Hardened spindle with precisely cut threads for smooth movement and high accuracy. Satin chrome thimble and barrel with convenient to read deep etched graduations in black. Ratchet stop for exact repetitive measurements. Quick and easy zero adjustment with spanner wrench.


GRO6925 (Size: 0-25MM 103-137)    
GRO6930 (Size: 25-50MM 103-138)  
GRO6935 (Size: 50-75MM 103-139)  
GRO6940 (Size: 75-100MM 103-140)




GROZ DIGITAL OUTSIDE MICROMETER 0-25MM / 0-1INCH

Superior tool designed to measure, record & display dimensions in inches & mm. Balanced Frame Design: Steel frame prevents flexing ensuring greater accuracy in measurement. Insulation at top and bottom end of the frame safeguards against data distortion due to thermal expansion. Extra large, high contrast LCD digital read out. Non – wearing carbide tipped anvil & measuring faces ensure accurate measurements over a long period of time. Zero setting at any position along the scale. Two Measuring Modes : Absolute & Incremental. Unique Ball Attachment : Each piece comes with a standard ball attachment that converts a regular micrometer into a pipe micrometer, enabling measurement of pipes, tubes, etc. Supplied with master on all sizes except 0-25mm / 0-1”. Integral data output interface to transfer data to PC / Laptop etc. Data cable not included. Comes complete with SR44 battery. Data cable not included. Available in two variants : IP54 & IP65 level compliance.


GRO6945 (Resolution: +/- 0.004mm - 293-521/230)
GRO6946 (Resolution: +/-0.002mm - 193-101)          




MOORE & WRIGHT OUTSIDE MICROMETER STD 100-125MM X 0.01MM MAW-210-01


Features:
Standard: DIN 863. Strong forged steel frame, Hammer tone finish, Quality insulated grip. Design line product. Satin chrome scale. Tapered for easier access to difficult areas. With tungsten carbide measuring faces, constant force ratchet. Packed in wooden box with standard and adjusting key.

Range: 100-125mm
Resolution: 0.01mm



MAW210-01  




MOORE & WRIGHT OUTSIDE MICROMETER STD 125-150MM X 0.01MM MAW-210-02


Features:
Standard: DIN 863. Strong forged steel frame, Hammer tone finish, Quality insulated grip. Design line product. Satin chrome scale. Tapered for easier access to difficult areas. With tungsten carbide measuring faces, constant force ratchet. Packed in wooden box with standard and adjusting key.

Range: 125-150mm
Resolution: 0.01mm



MAW210-02  



MOORE & WRIGHT OUTSIDE MICROMETER SET 0-150MM X 0.01MM 6 PIECE MAW-215-03BL


Features:
Standard: DIN 863. Satin chrome scale. Satin chrome forged steel frame with insulated grip. With tungsten carbide measuring faces constant force ratchet. Tapered for easier access to difficult areas. Packed in wooden box with standards and adjusting key.
Micrometers in set: 0-25; 25-50; 50-75; 75-100; 100-125; 125-150

Range: 0-150
Resolution: 0.01mm


MAW215-03BL




MOORE & WRIGHT OUTSIDE MICROMETER WITH INTERCHANGEABLE ANVILS SET 0-100MM X 0.01MM MAW-217-01


Features:
Standard: DIN 863. Features wide measuring range with interchangeable anvils. Hardened and ground spindles and anvils. Strong forged steel frame, hammerstone finish, quality insulated grip. Design line product. Satin chrome scale. Tapered for easier access to difficult areas. With tungsten carbide measuring faces and constant force ratchet. Packed in wooden box with standards and adjusting key.

Range: 0-100mm
Resolution: 0.01mm


MAW217-01




MOORE & WRIGHT OUTSIDE MICROMETER WITH INTERCHANGEABLE ANVILS SET 0-150MM X 0.01MM MAW-217-02


Features:
Standard: DIN 863. Features wide measuring range with interchangeable anvils. Hardened and ground spindles and anvils. Strong forged steel frame, hammerstone finish, quality insulated grip. Design line product. Satin chrome scale. Tapered for easier access to difficult areas. With tungsten carbide measuring faces and constant force ratchet. Packed in wooden box with standards and adjusting key.

Range: 0-150mm
Resolution: 0.01mm


MAW217-02  




MOORE & WRIGHT OUTSIDE MICROMETER WITH INTERCHANGEABLE ANVILS SET 150-300MM X 0.01MM MAW-217-04

Features:
Standard: DIN 863. Features wide measuring range with interchangeable anvils. Hardened and ground spindles and anvils. Strong forged steel frame, hammerstone finish, quality insulated grip. Design line product. Satin chrome scale. Tapered for easier access to difficult areas. With tungsten carbide measuring faces and constant force ratchet. Packed in wooden box with standards and adjusting key.

Range: 150 -300mm
Resolution: 0.01mm



MAW217-04  



MOORE & WRIGHT INSIDE TUBULAR MICROMETER SET 50-250MM X 0.01MM MAW-300-01

Features:
Standard: DIN 863. Ideal for large diameters. With tungsten carbide measuring faces. All measuring faces are micro-lapped. Satin chromed scale and Body with lock screw. All extension pieces equipped with gauge-parts are under constant spring loading. Packed in a wooden box.

Range: 50-250mm
Resolution:  0.01mm



MAW300-01 




MOORE & WRIGHT INSIDE TUBULAR MICROMETER SET 50-600MM X 0.01MM MAW-300-02

Features:
Standard: DIN 863. Ideal for large diameters. With tungsten carbide measuring faces. All measuring faces are micro-lapped. Satin chromed scale and Body with lock screw. All extension pieces equipped with gauge-parts are under constant spring loading. Packed in a wooden box.

Range: 50-600mm   
Resolution: 0.01mm



MAW300-02


  



MOORE & WRIGHT TRADITIONAL INSIDE MICROMETER SET 50-310MM MAW-903M

Features:
Standard: BS5959. Supplied with measuring head, extension rods and spacing collar for alternative measuring ranges. Detachable extension handles. Supplied in a fitted case.

Range: 50-310mm   
Head Range: 10mm


MAW903M

J and G Holdings (Pty) Ltd

We supply to your specification

Copyright © 2019. J&G Holdings (Pty) Ltd. All rights reserved