J & G Holdings (Pty) Ltd

We supply to your specification

MORSE TAPER SHANK DRILLS AND SLEEVES





INDUSTRIAL HSS MORSE TAPER SHANK DRILLS No.1


Standard point is suitable for general purpose drilling. High Speed Steel (HSS), Type N Morse Taper Shank. Right hand cut with 118° point angle. For drilling in commonly used materials up to approximately 1200 N/mm² strength such as steel and steel castings, sintered metal, non ferrous metals, plastics and all woods. Available in individual PVC protective boxes.

FOX6010 (Size: 12.0mm, Morse Taper Shank: 1, Length: 182.0mm)
FOX6020 (Size: 13.5mm, Morse Taper Shank: 1, Length: 189.0mm)
 










INDUSTRIAL HSS MORSE TAPER SHANK DRILLS No.2


Standard point is suitable for general purpose drilling. High Speed Steel (HSS), Type N Morse Taper Shank. Right hand cut with 118° point angle. For drilling in commonly used materials up to approximately 1200 N/mm² strength such as steel and steel castings, sintered metal, non ferrous metals, plastics and all woods. Available in individual PVC protective boxes.

FOX6030 (Size: 14.5mm, Morse Taper Shank: 2, Length: 212
.0mm
 











GROZ MORSE TAPER SHANK DRILL SLEEVE


Drill sleeves are used to adapt smaller Morse Taper Shank tools to larger machine spindles. The concentricity and taper angles are precisely controlled which allows perfect locking and concentric movement to the tool held. Manufactured from Carbon Steel, these are ground on the outside and have a reamed finish on the inside. Tang is fully hardened. Permanent marking of size on the tang ensures convenience in use.

GRO1860 (Morse Taper Shank: 1, Morse Taper Outside: 2, 
Length: 92.0mm) 

GRO1865 (Morse Taper Shank: 2, Morse Taper Outside: 3,
Length: 112.0mm)

GRO1870 (Morse Taper Shank: 3, Morse Taper Outside: 4,
Length: 140.0mm)

GRO1875 (Morse Taper Shank: 4, Morse Taper Outside: 5,
Length: 171.0mm)


 








GROZ DRILL CHUCK ARBOR  (DIN 238)

Drill chuck arbors are used to mount a drill chuck or any other tool which has a male taper onto a machine such as a drilling machine which has a female taper/straight shank socket in its work head. Manufactured from selected case hardened Hi-Tensile Steel (20MnCr5/SAE8620). All arbors are case hardened to 54-58 HRC for increased resistance to wear. Precise grinding to very close tolerance with concentricity controlled to within 0.0004” (10 Microns) and accurately gauged self locking tapers ensure close tolerance fit.


GRO0505 (Morse Taper: 3, Chuck Mount: B12)
GRO0510 (Morse Taper: 2, Chuck Mount: B16)
GRO0515 (Morse Taper: 3, Chuck Mount: B16)
GRO0525 (Morse Taper: 2, Chuck Mount: B18)







 




BLU-MOL MTS HSS WHITE MORSE 1 DRILL BIT


Used for drilling steel, alloyed steel and all general purposes.

BM0161100 (12mm)
BM0161101 (13mm)
BM0161102 (14mm)












BLU-MOL MTS HSS WHITE MORSE 2 DRILL BIT

Used for drilling steel, alloyed steel and all general purposes.

BM0161103 (16mm)
BM0161104 (17mm)
BM0161105 (18mm)
BM0161106 (20mm)
BM0161107 (22mm)












J and G Holdings (Pty) Ltd

We supply to your specification