PUNCHES

GROZ PRICK PUNCH PKP5

GROZ HEAVY DUTY CENTRE PUNCH CPHD

Ideal for marking metal and making indentations in a work piece before drilling. Manufactured from selected carbon steel, accurately hardened for increased life. Working tips are centered and ground to correct angles (90° included angle) for increased efficiency and the striking end is beveled to prevent breakage.

GRO4040 (Size: 6 x 150mm)  
GRO4042 (Size: 10 x 150mm)

GROZ ROUND HEAD CENTRE PUNCH CP

Ideal for marking metal and making indentations in a work piece before drilling. Manufactured from selected carbon steel, accurately hardened and tempered for increased life. Working tips are centered and ground to correct angles (90° included angle) for increased efficiency and the striking end is beveled to prevent breakage.

GRO4000 (Size: 1,5 x 75mm)  
GRO4003 (Size: 2.0 x 100mm)
GRO4005 (Size: 2.5 x 100mm)
GRO4010 (Size: 3.5 x 100mm)
GRO4015 (Size: 4.0 x 100mm)
GRO4017 (Size: 5.0 x 100mm)

GROZ SQUARE HEAD CENTRE PUNCH CPSQ

STAHLWILLE CENTRE PUNCH 105

Chrome vanadium steel. Octagonal. Steel lacquered silver.

STW70050001 (Size: 10 x 100mm)
STW70050002 (Size: 12 x 120mm)

LASHER CENTRE PUNCH FG02850,  FG02855,  FG02860, FG02865

Used to mark hole centers to guide the point of a drill. Phosphated finish.

LAS2800 (Size: 3 x 8 x 115mm)  
LAS2805 (Size: 4 x 8 x 115mm)  
LAS2810 (Size: 5 x 10 x 140mm)
LAS2815 (Size: 6 x 12 x 160mm)

GROZ ROUND HEAD CENTRE PUNCH SET 8 PIECE WITH BOX 1.5-5.5 CP/8-WD

Ideal for marking metal and making indentations in a work piece before drilling. Manufactured from selected carbon steel, accurately hardened and tempered for increased life. Working tips are centered and ground to correct angles (90° included angle) for increased efficiency and the striking end is beveled to prevent breakage. Contents: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5.5 x 100mm
Supplied in round wooden box

GRO4023

GROZ ROUND HEAD CENTRE PUNCH SET 5 PIECE CP-5

GROZ SQUARE HEAD NAIL PUNCH NLP/SQ

STANLEY NAIL SET 3 PIECE 58-230

GROZ PIN PUNCH PPR

LASHER PIN PUNCH FG02885,  FG02890,  FG02895,  FG02900,  FG02905,  FG02910

Used to drive out a pin from an assembly. Phosphated finish.

LAS2840 (Size: 3 x 8 x 115mm)    
LAS2845 (Size: 4 x 8 x 115mm)    
LAS2850 (Size: 5 x 10 x 140mm)  
LAS2855 (Size: 6 x 10 x 140mm)  
LAS2860 (Size: 8 x 12 x 160mm)  
LAS2865 (Size: 10 x 12 x 160mm)

GROZ PIN PUNCH SET 8 PIECE L/S 1.5-8MM PPR/8-ST

LASHER PIN PUNCH SET 6 PIECE FG03295

LASHER PIN PUNCH SET 4 PIECE NO P4 FG03300

STAHLWILLE PARALLEL PIN PUNCH SET 6 PIECES 108/6D

DIN 6450. Octagonal. Chrome vanadium steel. Lacquered silver. In plastic stand.
Contents: 150 x 2.50, 150 x 3.00, 150 x 4.00, 150 x 5.00, 150 x 6.00, 150 x 8.00.

STW96700701

GROZ PUNCH DRIFT DFPHD

Drift punches are ideal for lining up holes in two or more pieces of metal and drawing pins through various assemblies. A single piece construction with a hexagonal shank, manufactured from hardened carbon steel, they are accurately hardened for extended service life (52-58 Rockwell). The working ends are machine ground with the body in a premium powder coated finish.

GRO4050 (Size: 4,0 x 225mm)
GRO4052 (Size: 6,0 x 300mm)

LASHER ROOFING PUNCH FG02915, FG02920

Used to punch holes through sheet metal or corrugated sheets to take fastenings. Precision turned from the finest quality tool steel. Phosphated finish.

LAS2870 (Size: 6 x 12 x 160mm)
LAS2875 (Size: 8 x 16 x 200mm)

LASHER PUNCH AND CHISEL SET SET 10 PIECE P10 FG03290

Roofing punches are used to punch holes through sheet metal of corrugated sheets to take fastenings. Phosphated finish. 10 piece sets are available in plastic wallets.

LAS2790

GROZ NUMBER AND LETTER PUNCH SETS NP / LP

For hand held, hammer strike applications. High quality steel, induction hardened. Striking end is softer than the punch end to prevent splintering. Stamping end is hardened to 58-62 HRC. Striking end is beveled for safety, striking end is tempered to 38-43 HRC. Supplied in convenient boxed sets.

GRO4100 (Figure 3mm)   
GRO4105 (Figure 5mm)   
GRO4110 (Figure 6mm)   
GRO4115 (Figure 8mm)   
GRO4120 (Figure 10mm)
GRO4125 (Figure 12mm)
GRO4200 (Letter 3mm)   
GRO4205 (Letter 5mm)   
GRO4210 (Letter 6mm)   
GRO4215 (Letter 8mm)   
GRO4220 (Letter 10mm)
GRO4225 (Letter 12mm)

GROZ BELT PUNCH HPL

These have a compact cylindrical construction and are machined from one piece steel. These hollow steel punches are ideal for use on gasket material, leather, rubber, plastic, canvas and other soft materials etc. The precisely ground cutting edge is induction hardened and tempered for longer life reduced wear. Special design of the cutting tip prevents jamming of materials inside the punch. These are manufactured in sizes ranging from 2mm to 25mm.

GRO3800 (Size: 2mm)  
GRO3805 (Size: 3mm)  
GRO3810 (Size: 4mm)  
GRO3815 (Size: 5mm)  
GRO3820 (Size: 6mm)  
GRO3823 (Size: 7mm)  
GRO3825 (Size: 8mm)  
GRO3828 (Size: 9mm)  
GRO3830 (Size: 10mm)
GRO3835 (Size: 11mm)
GRO3840 (Size: 12mm)
GRO3843 (Size: 13mm)
GRO3845 (Size: 14mm)
GRO3850 (Size: 16mm)
GRO3855 (Size: 19mm)
GRO3860 (Size: 22mm)
GRO3865 (Size: 25mm)

GROZ WAD PUNCH HPL

These punches have an Arch/Bell shaped construction. They are larger in form with long shaft for convenient holding. The shank is powder coated with a ground finish cutting edge. Supplied in a professional wooden case. Range from 30mm to 40mm.

GRO4600 (Size: 30mm)
GRO4605 (Size: 32mm)
GRO4610 (Size: 35mm)
GRO4615 (Size: 38mm)
GRO4620 (Size: 40mm)

GROZ WAD PUNCH SET 6-19MM HPL/7M-ST

These have a compact cylindrical construction and are machined from one piece steel. These hollow steel punches are ideal for use on gasket material, leather, rubber, plastic, canvas and other soft materials etc. The precisely ground cutting edge is induction hardened and tempered for longer life reduced wear. Special design of the cutting tip prevents jamming of materials inside the punch. Supplied in a convenient plastic pouch.
Contents: 6, 8, 10, 11, 13, 16 and 19mm

GRO3880 (Size: 6-19mm)

GROZ WAD PUNCH SET 6-25MM HPL/10M-ST

These have a compact cylindrical construction and are machined from one piece steel. These hollow steel punches are ideal for use on gasket material, leather, rubber, plastic, canvas and other soft materials etc. The precisely ground cutting edge is induction hardened and tempered for longer life reduced wear. Special design of the cutting tip prevents jamming of materials inside the punch. Supplied in a convenient plastic pouch.
Contents: 6, 8, 10, 11, 13, 16, 19, 22, 25mm.

GRO3882 (Size: 6-25mm)

GROZ WAD PUNCH SET 14 PIECE HPL/14M-ST

These punches have an Arch/Bell shaped construction. They are larger in form with long shaft for convenient holding. The shank is powder coated with a ground finish cutting edge. Supplied in a professional wooden case.
Contents 6, 8, 10, 11, 13, 14, 16, 19, 22, 25, 30, 32, 35, 38mm

GRO3884 (Size: 6-38mm)

QMAX ROUND CHASSIS PUNCHES

Used for marking holes in sheet-metal. Punch is bolted through a pre-drilled hole. Tighten the nut and the hole is punched. Car aerials, distribution boxes etc.

GROZ AUTOMATIC CENTRE PUNCH ACP/1C

Fully automatic single hand operated spring loaded punches. No Hammering - built-in mechanism delivers a punch just with the pressing of the head. Variable depth impression simply by turning the knurled head. Screwing the cap downwards produces heavy indentation; progressively lighter marking can be obtained by screwing the cap upwards Once the knurled cap is set to the desired position, the punch will strike the same depth every time. Round shank with clean and well cut knurling for positive non-slip grip. Tips are made from hardened tool steel and can be easily removed for re-sharpening or replacement. Automatic Centre Punch - Steel. Useful for light marking jobs

GRO4020

KENDO REVOLVING PUNCH PLIER 235MM

Professional quality plier, made from heavy gauge pressed steel sheet Used to punch holes in leather, canvas, plastics, watch bands, belts etc. Punches are precisely heat treated for extended life and are exposed to a brass anvil which prevents the edges from getting damaged in use. Each punch locates exactly in position locking in place with the prawl and ratchet mechanism. Spring loaded revolving head incorporates 6 punches of sizes: 5/64" (2 mm) 3/32"(2.5 mm) 1/8"(3.0 mm) 9/64" (3.5 mm) 5/32"(4 mm) 3/16" (4.5 mm).

KEN11824

GROZ REVOLVING PUNCH PLIER RPL6

Made from heavy gauge pressed sheet steel. Spring loaded revolving head incorporates 6 punches of sizes; 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm. Punches are accurately treated for extended life and are exposed to a brass anvil which prevents the edges from getting damaged in use. Each punch locates exactly in position locking in place with the pawl and ratchet mechanism.

GRO3075 (Size: 220mm)

WILL REVOLVING PUNCH PLIER 150

GEDORE PARALLEL PIN PUNCH SET 6 PIECE 3160

Gedore 316D pin punch set, excellent quality hot forged, hardened and tempered. Six piece pin punch set supplied in metal case for easy storage.  Six piece Pin Punch Set. DIN 6450. In metal case with lid. Hot forged. Hardened and tempered. Striking head, blue varnish finish.

Contents: 3mm, 4mm, 5mm, 6mm, 8mm and 10mm

GED3014320

KENDO PIN PUNCH SET 6 PIECE

Drop forged chrome alloy steel blade. Hexagonal shaft. Hardened and tempered.

Contents: 1pc cold chisel: 13 x 10 x 152mm, 1pc cape chisel:5 x 10 x 152mm, 1pc center punch: 6 x 10 x 102mm, 1pc pin punch: 8 x 10 x 152mm and 1pc taper punch: 2 x 10 x 140mm

KEN26543