J & G Holdings (Pty) Ltd

We supply to your specification

VERNIERS





MTS STAINLESS STEEL VERNIER 150MM

Provided with thumb lock for easier handling. ”Quadri” 4-way measurement system. Outside - inside - depth - step - measurement.
Allowance ±0,1m

HON9092 (Size: 150mm)












MOORE & WRIGHT VERNIER CALIPER 0-150MM 110-15


Features:
High precision Vernier caliper. 4 Way measurement. Mono block solid slider model. Equipped with fine adjustment. Made of hardened /stainless steel.
Chromed scale with laser engraved graduations. Scale shows both mm and inch values. Measuring surface is micro lapped. Supplied with leather look wallet. Optional plastic box.

Range: 0-150mm
Resolution: 0.05mm

Jaws Length: 40mm

MAW110-15










MOORE & WRIGHT VERNIER CALIPER 0-200MM 110-20


Features:
High precision Vernier Caliper. 4 Way measurement. Mono block solid slider model. Equipped with fine adjustment. Made of hardened /stainless steel. Chromed scale with laser engraved graduations. Scale shows both mm and inch values. Measuring surface is micro lapped. Supplied with leather look wallet. Optional plastic box.

Range: 0-200mm
Resolution: 0.05mm
Jaws Length: 40mm

MAW110-20












MOORE & WRIGHT VERNIER CALIPER 0-300MM 110-30


Features:
High precision Vernier Caliper. 4 Way measurement. Mono block solid slider model. Equipped with fine adjustment. Made of hardened /stainless steel. Chromed scale with laser engraved graduations. Scale shows both mm and inch values. Measuring surface is micro lapped. Supplied with leather look wallet. Optional plastic box.

Range: 0-300mm
Resolution: 0.05mm
Jaws Length: 55mm

MAW110-30








OMNI-TECH VERNIER CALIPER 150MM 103-1502


Screw lock. Standard design. Clamping screw on top of the slide .Measures OD, ID, depth and steps.

Range: 0-150 mm
Accuracy: 
0.05mm 
Reading: ±0.05

SHA1800











OMNI-TECH VERNIER CALIPER 200MM 103-2002


Screw lock. Standard design. Clamping screw on top of the slide .Measures OD, ID, depth and steps.

Range: 0-200 mm
Accuracy: 0.05mm
Reading: ±0.05

SHA1805











MITUTOYO VERNIER CALIPER 600MM 160-101

With fine adjustment. With Nib Style laws. Jaws have round measuring faces for accurate ID measurements. With fine - adjustable carriage to feed the slider finely. Inside and outside measurements can be directly read from the upper and lower slider graduations, respectively. No depth measuring bar.

INT Range: 20-600 mm  
EXT Reading: 0-600 mm
Graduation: 0.02 mm     
Accuracy: 0.05 mm         


MIT160-101










MITUTOYO VERNIER CALIPER 180MM 532-102

With fine adjustment. Provided with a fine adjustment carriage. Can measure OD, ID, depth and stops.

Range: 0-180 mm  
Accuracy: 0.02 mm
Reading: 0.03 mm  

MIT532-102









OMNI-TECH VERNIER CALIPER MM/SAE 150MM


Screw lock. Standard design. Clamping screw on top of the slide. Measures OD, ID, depth and steps. Metric/imperial.

Range: 0-150mm
Graduation: 
0.02
Accuracy:
 ±0.03

SHA1855








OMNI-TECH VERNIER CALIPER FINE ADJUSTMENT 600MM IS/OS 150-62


Features:
Factory standard. Standard workshop model with stop screw. Mono block solid slider. Made of hardened alloyed stainless steel. Jaws for internal and external measurement. Chromed scale with laser engraved graduations. Measuring surface is micro-lapped. With fine adjustment. Packed in wooden box.

Range: 0-600mm
Resolution: 0.02mm
Jaws Length: 100mm

MAW150-62 








OMNI-TECH VERNIER CALIPER FINE ADJUSTMENT 1000MM IS/OS 150-72


Features:
Factory standard. Standard workshop model with stop screw. Mono block solid slider. Made of hardened alloyed stainless steel. Jaws for internal and external measurement. Chromed scale with laser engraved graduations. Measuring surface is micro-lapped. With fine adjustment. Packed in wooden box.

Range:0-1000mm
Resolution:0.02mm
Jaws Length:125mm

MAW150-72











MOORE & WRIGHT VERNIER CALIPER WITH DIAL INDICATOR


Features:
Standard: DIN 862. High quality shockproof dial caliper. Rapid movement with thumb wheel. Covered rack. 4-way measurement. Standard yellow metric face. Hardened stainless steel rack. Measuring surface is micro-lapped.

MAW142-15 (Range: 0-150mm,  Resolution: 0.02mm)
MAW142-20 (Range: 0-200mm,  Resolution: 0.02mm)








MOORE & WRIGHT DIGITRONIC WATER RESISTANT VERNIER CALIPER 150MM X 0.01MM 110-15WR


Features:
Standard: DIN 862. Water and dust resistant to IP54 specification. 
Functions:
Mm/inch conversion. On/off. Zero setting ABS/INC measurement. Patented ceramic capacitive sensor. Large LCD screen. CR2032 battery.

Range: 0-150mm      
Resolution: 0.01mm
Length Jaw: 40mm  

MAW110-15WR 









MOORE & WRIGHT DIGITRONIC WATER RESISTANT VERNIER CALIPER 200MM X 0.01MM 110-20WR


Features:
Standard: DIN 862. Water and dust resistant to IP54 specification.
Functions:
Mm/inch conversion. On/off. Zero setting ABS/INC measurement. Patented ceramic capacitive sensor. Large LCD screen. CR2032 battery.

Range: 0-200mm      
Resolution: 0.01mm
Length Jaw: 50mm  

MAW110-20WR













MOORE & WRIGHT DIGITRONIC WATER RESISTANT VERNIER CALIPER 300MM X 0.01MM 110-30WR


Features:
Standard: DIN 862. Water and dust resistant to IP54 specification.
Functions:
Mm/inch conversion. On/off. Zero setting ABS/INC measurement. Patented ceramic capacitive sensor. Large LCD screen. CR2032 battery.

Range: 0-300mm      
Resolution: 0.01mm
Length Jaw: 60mm  

MAW110-30WR


  







GEDORE RED DIGITAL MEASURING VERNIER CALIPER 153MM


No more repeated zero settings is necessary as well as no more care for over-speed errors. Large and clear LCD read out. The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to absolute (ABS) coordinate and display of the true position from the origin point (usually jaws - closed point). Carbide - tipped jaw type calipers are also available.           

GEDR94420021












GROZ VERNIER CALIPER 530

Manufactured from heavy gauge steel. Permanently etched black graduations in mm and 1/16th of an inch. Slide lock for gauging depths - these calipers work on a friction roller adjustment mechanism. Useful for making inside, outside depth and step measurements.


GRO0032 (Size: 150mm - 530-101)                
GRO0033 (Size: 200mm - 530-108)                 
GRO0034 (Size: 300mm - 530-119MM/IMP)













GROZ VERNIER CALIPER WITH DIAL INDICATOR 505


High quality shockproof dial caliper. Rapid movement with thumb wheel. Covered rack. 4-way measurement. Standard white metric face. Hardened stainless steel rack.

GRO0036 (Size: 150mm - 505-646/730)
GRO0037 (Size: 200mm - 505-647/731)
GRO0038 (Size: 300mm - 505-648/745)















GROZ DIGITAL VERNIER CALIPER 500


No more repeated zero settings is necessary as well as no more care for over-speed errors. Large and clear LCD read out. The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to absolute (ABS) coordinate and display of the true position from the origin point (usually jaws - closed point). Carbide - tipped jaw type calipers are also available.          

GRO0039 (Size: 150mm - 500-171)
GRO0040 (Size: 200mm - 500-172)
GRO0041 (Size: 300mm - 500-173)












KENDO DIGITAL VERNIER CALIPER 150MM

No more repeated zero settings is necessary as well as no more care for over-speed errors. Large and clear LCD read out. The ZERO/ABS key allows the display to be zero-set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to absolute (ABS) coordinate and display of the true position from the origin point (usually jaws - closed point). Carbide - tipped jaw type calipers are also available.


KEN35301












KENDO METAL VERNIER CALIPER 150MM

Manufactured from heavy gauge steel. Permanently etched black graduations in mm and 1/16th of an inch. Slide lock for gauging depths - these calipers work on a friction roller adjustment mechanism. Useful for making inside, outside depth and step measurements.

KEN35311









GROZ DEPTH GAUGE 300MM 527-103

Manufactured from hardened stainless steel. Designed for measuring depths of holes, slots, fixtures and die work. Vernier scale etched with permanent black graduations allows precise and convenient reading. Free wheeling thumb screw for smooth movement along the linear scale. Base Width: 100 mm. Base Thickness: 7.0 mm. Convenient to use locking screw to set calipers at desired position useful in applications requiring repetitive measurements. Resolution: 0.05mm.


GRO1915








J and G Holdings (Pty) Ltd

We supply to your specification